KPMO
DESCRIPTION
The home connection-measuring cabinet is intended for use in distribution networks, and serves as a connection point for residential and office buildings.
ENCLOSURE
The enclosure of the cabinet, same as the base, is made of insulating material, high-quality pressed poliester reinforced with glass fibers, resistant to mechanical, thermal and UV influences. The cabinet enclosure features a modern design, with the possibility of a smooth or anti-poster surface (ribbed), depending on the needs and the location of installation. Enclosure design allows for natural air circulation.
INSTALLATION
It is intended for exterior or interior installation, with the possibility of installation in the wall, on the wall or on the pillar. Also, in the case of outdoor installation, it is possible to install a skew roof made of pressed polyester. The cabinet is normally closed with a unified half-turn lock with 3 point locking system.
EXECUTION
The cabinet design allows the installation of all kinds of standardized meters, from single-phase to three-phase electronic counters with built-in direct charging device up to 100A. The meter is placed on the polycarbonate counter plate, there is also the possibility of installing the tariff unit on the meter clamp cover or on a separate plate.
QUALITY
Has a CE quality mark, and are of top quality, tested and certified in accordance with the requirements and regulations of the relevant European standards and laws.
|
Rated voltage (Un) |
3×230/400V |
|
Rated frequency (fn) |
50 Hz |
|
Rated current (In) |
100 A |
|
Class of protection against electric shock |
II |
|
Degree of mechanical protection |
IP 54 ili IP44 |
|
The type of conductor system under voltage |
2 conduttori e 4 conduttori |
|
System grounding type |
TN, TN-C, TNC-S, TT |
|
Rated insulation voltage (Ui) |
690 V |
|
Rated Nominal Voltage (Uimp) |
6 kV |
|
Rated short-term tolerable current |
50 kA |
|
Rated peak current |
100 kA |
|
Rated breaking current (AC400V, AC21B, AC23B) |
100A |
|
Switching power at 400V AC |
2 kA |
|
Color |
Gray, RAL 7035 |
|
Weight |
5 kg |
|
Temperature |
-25°C ± +40°C |
|
APPLIED NORMS |
HRN EN 62208, HRN EN 61439-1, 61439-2,HRN EN 60529, HRN EN 50102 |
